Techno Line WT 494, Инструкция по эксплуатации

Страница: 14 / 64

EN6
TO CHARGE MOBILE DEVICES WITH THE USB PORT
Connect the charging cable of your mobile phone to the A-type USB port at the back of the unit, then
connect the other end to your mobile phone. The clock radio will charge the mobile phone
automatically.
Remarks :
1. Make sure the original cable of your mobile phone is used as the charging cable for
charging
2. Make sure the original adaptor (5V-1.2A) enclosed with your clock radio is being used
to power your clock radio. Using other adaptors may not charge your phone.
3. iPad and Notepad charging is not supported.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference
.
Unplug the DC jack at the back of the unit, slide open the
battery cover and take out the batteries. Then re-plug the DC jack and reinstall batteries by observing
the c/- polarity. Your unit will be reset to default settings and you need to set it again.
CARE OF YOUR PRODUCT
1. Place your unit on a stable surface, away from sources of direct sunlight or excessive heat or
moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by using
a cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents
such as Benzine, thinner or similar materials can damage the surface of the unit. Make sure
the unit is unplugged before cleaning.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.