Techno Line WT 494, Инструкция по эксплуатации

Страница: 11 / 64

EN3
3. Press SET
once again, “
24Hr
” will flash, press / to select “
12 Hr
” or “
24 Hr
” time format.
For 12Hr
time format, “
PM
”
will appear on the left of time digits to indicate the afternoon time.
There is no AM icon to indicate before-noon time.
4. Press SET once again,
“
n05
”
flash, press or to set the snooze duration (from 5 min to
60 min.).
5. Press SET once again,
“°C”
flashes, press or to select temperature readout in °C
or °F.
6. Press SET again to confirm. The set time is displayed.
Note: the clock exits the set mode when no key is pressed in approximate 10 seconds.
TO SET ALARM 1 AND ALARM 2 (default alarm time at 6:00 AM)
1. Press and hold , LED and hour digit
“
6
” flash, press
or to set the
desired hour. Press and hold or to accelerate setting at high speed.
2. Press once again, the minute digits
“
00
” flash. Press
or to set desired
minutes. Press and hold or to accelerate setting at high speed.
3. Press hold once again, LED displays
“bu”
(buzzer)., Press or to select the
wake-up sound sources :-
bu = Buzzer
rd = Radio
4.
If “
rd
” (
wake-to-radio ) is selected,
LED display “
HI
”. Press
or to select the wake up
volume of radio to “
LO
”. This selection does not apply for “
bu
” (wake-to-buzzer).
5. Press once again, LED and Alarm 2
’s hour digit “
6
” flash. Repeat Step 1 to 3
above to set Alarm 2.
6. In the middle of setting the alarm, press SET once to store your alarm setting and exit the
alarm set mode.
Note: the clock exits the alarm set mode when no key is pressed in approximate 10 seconds.
TO TURN ON OR OFF ALARM 1 AND 2
1. Press once to activate Alarm 1, LED appears.
2. Press once again to activate Alarm 2, LED appears.
3. Press once again to activate both Alarm 1 and 2. Both LED and LED appear.
4. Press once again to deactivate both alarms (both LED and LED disappear).