Technisonic Industries Limited TiL-90-6R/8.33, Инструкция по установке и эксплуатации

Страница: 41 / 45

3-3
3.3.2 Data Transfer Menu
Figure 3.3.2 - Data Menu
Download (to Radio) instructs the TDP-90 software to transfer the frequency data in the
list to the memory channels in the connected 8.33 kHz AM transceiver. The Dn icon
provides the same function in a single mouse click.
Upload (from Radio) instructs the TDP-90 program to wait for and read the channel data
from the memory channels in the connected 8.33 kHz AM transceiver. The Up icon provides
the same function in a single mouse click.
Com1 (2,3,4) selects the COM (RS-232 Serial COMmunications) port on your computer, to
which the transceiver is connected. On computers manufactured after 1990, COM 1 is typically
a 9 pin male "D" connector. COM 2 may be either a 9 pin male or 25 pin male "D" connector. COM
3 and COM 4 are available in the TDP-90 software as a valid option, although they typically exist
only in a computer with a third party serial communications card installed.
The COM port setting is automatically saved. The next time the TDP-90 software is executed, the
previously selected COM port will be used.
NOTE: ** The TDP-90 software assumes you have an available and
properly configured COM port, and assumes that an 8.33 AM
transceiver is connected. **