Technische Alternative RAS-PLUS, Инструкции по установке программного обеспечения

Страница: 4 / 28

4
Function description
The room sensor RAS-PLUS was specially developed for Technical Alternative control
units and is intended for mounting in the living area (reference space). The room sensor
should not be installed near a source of heat or near a window. It is only suitable for opera-
tion in dry rooms.
The RAS-PLUS transmits the room temperature, relative room humidity (only RAS-PLUS/F)
and the dew point (only RAS-PLUS/F), the operating mode and the correction value for the
nominal value (+/- 5K) to the controller via the bidirectional data link (DL-bus). Using the DL-
bus it is also possible to display controller sensor values, output states, heat quantity counter
outputs and network inputs at the
RAS-PLUS (remote display). Programming of the sensor
permits the setting of which values and symbols are to be output to the display. Moreover
there is a choice between automatic or manual scrolling between the displays.
The sensor
RAS-PLUS can be used with the following controllers as a room sensor with
remote display :

UVR 16x2

RSM 610

CAN-I/O 45

UVR 1611 from version A3.00 and serial number13286

UVR 63-H from version 7.2

UVR 63 from version 1.0

UVR 61-3 from version 5.0

ESR 31 from version 1.0

ESR 21 from version 5.0
Moreover the
RAS-PLUS can also be used with the following controllers as a remote dis-
play device (without sensor functions):

UVR 31

UVR 42

UVR 64

HZR 65

UVR 1611 < version A3.00

UVR 63-H < version 5.0

UVR 61-3 < version 5.0

ESR 21 < version 5.0
These controllers do not have a bidirectional data link.