46
47
The programs will be sorted according to the settings in the main menu.
Default setting is sorting by LCN numbering.
The receiver scans DVB-T/T2 channels according to country-specific
specifications. The country selected by default depends on the initial settings
applied. You can change this setting in the search menu.
Manual channel search
Manual Search allows you to scan a specific DVB-T channel.
>
To start a manual search, please select the "Manual search" field using the "up/
down" buttons.
>
Confirm your selection with the "OK" button. Select the channel you wish
to search with the left/right buttons. Confirm your selection by selecting
"Start" and pressing the "OK" button.
Antenna power supply
The device can power an antenna amplifier with 5V voltage.
>
To power the amplifier with 5V, switch with the up/down arrow buttons to
the "Antenna Power" position.
>
Using the right/left arrow buttons, select "on" to activate the power supply or
select "off" to deactivate the power supply
By default, the antenna power is turned off. Before turning on the power,
please check the specifications of the built-in antenna amplifier.
13.6 Time
This menu is used to set the time, region, and allows you to automatically turn off/on
the decoder after a specified time. Additionally, you can find here options related to
timers for recording and changing programs.
Region and time
The receiver can automatically acquire the time and date from the signal
(recommended) or you can set the time manually. When using GMT, select the
appropriate time shift value (e.g. +1 hour for Poland) and enable or disable daylight
saving time, depending on the time of year.
