7.13.3 Timer
You can use the EPG electronic programme guide to make programming of the Timer events
easier.
>
Mark the stations you want to include in the Timer programming as described
previously.
>
Now press the
red Set timer
function key.
The Set timer menu with the selected programme data will be displayed so that you
can check it. You can make change whenever necessary (see Section 7.16).
>
The Timer with the displayed data can be imported by pressing the
yellow Accept
function key.
Attention!
>
Press the
Return
button to exit the current timer prpgramme.
7.13.4 Exiting EPG
>
Press the
Menu
or
TV/radio
button to return to normal working.
7.14 Timer redordings
Your receiver uses a video recorder Timer. You can program the Timer manually as
described in this chapter or as described in Section 7.13.3.
The video recorder Timer will switch your digital receiveron or off to record the selected
programmes on an external unit, e.g. a video recorder, during your absence. Please note
that your video recorder must also be programmed to record the programme.
When your unit is switched on by the video recorder Timer, the normal remote control
functions are inhibited in order to prevent the recording session from being disconnected.
7.14.1 Manually programming the timer
>
Press the
Menu
button to call up the
Main menu
.
>
Mark the
Timer organizing
line using the
up/down arrow keys
.
>
Press the
OK
to confirm.
The
Timer organizing
sub-menu will be displayed.
31
EN
00100963_Digiboxx_T4_VA_EN.qxd 24.6.2009 9:39 Str. 31