>
Adjust the aerial so that maximum amplitude is displayed for the signal strength and
the signal quality display.
>
Use the
up/down arrow keys
to mark the
Proceed
field and then press
OK
to
confirm it.
Station search function
Station search is the step that comes after aerial adjustment.
>
Station search will be started automatically. The process will search the entire
reception frequency range for digital prograammes. This process can take a few
minutes. Please comply with any screen windows that are displyed.
If you are using an active aerial and no programmes are found or not all of the
programmes that are available at your location are found, you must switch the aerial
feed on as described in Section 6.2.4.
Software update
Nachdem der Suchlauf durchgefhrt wurde, Check the digital receiver after you have run the
search to see if ther is any new software available for your unit. A software update can be
run automatically if new software is available.
>
Use the
left/right arrow keys
to select the
Update
field and then press
OK
to
confirm.
The new software for your unit will now be downloaded. This process can take a few
minutes.
15
EN
00100963_Digiboxx_T4_VA_EN.qxd 24.6.2009 9:38 Str. 15