33
2:
Channel name with the corresponding channel slot within the active channel list.
3:
Progress bars or the start/stop time of the programme being shown.
4:
The current date and the time.
5:
Programmes on the channel being shown.
>
You can use the
right/left arrow keys
to switch the display time back and forth.
The progress bar in the time line is moved back and forth according to the display
time.
>
You can use the
yellow
function key to switch directly to the display of current and
next programmes.
>
By pressing the
up/down arrow keys
it is possible to move the highlight from line
to line and to move page by page using the
page up/down
buttons.
>
If there is more information available on the highlighted programme, you can access
and exit this by pressing the
Info
button.
>
By pressing the
OK
button you can switch directly to the highlighted channel.
7.11 Timer recordings
Your device has the following timer functions:
1. DVR timer
This function is used to switch your digital receiver on and off to record the selected
programme onto the selected recording medium while you are out, according to
section 10.4.1.
If the device is switched on by the DVR timer, this will be indicated by
l
DVR Timer
in the
display.
2. Video recorder timer
If the video recorder timer is selected, your digital receiver will be switched on and off for
the selected programme, allowing you to record programmes to an external recording unit,
e.g. a video cassette or DVD recorder, while you are out.
3. Channel switching timer
If your receiver is in normal operating mode, it will switch to the programmed channel slot
at the set time.
4. Alarm
If your receiver is in standby mode, it is switched on when the programmed channel slot is
reached at the set time.
5. Series timer
To make it easier to find programmes, you can search for programme data highlighted in the
SFI using any terms. The series timer function is used to automatically generate ongoing
DVR timer settings for the programmes you find. Timer setting also continues after the SFI
data has been updated. This removes the need for repeated manual programming of timers,
e.g. to record episodes in a TV series.
