4.
This will bring up the
Data Services
window as shown in Figure 4-33. First check to make sure
that the
MAC Source
is set to
User Defined IP
. If it isn’t, left click on the down arrow to
display a drop down menu. Highlight
User Defined IP
and left click on it. Next, you will type in
your IP address, which was provided to you when you first called in after receiving your
equipment. Please type it in carefully as this is critical for proper operation. Finally, you will
type
AE
for the
MAC Address
location (Figure 4-33). Once this is completed, left click on the
Apply
button, then on the
OK
button to close the window (Figure 4-34).
Figure 4-33
Figure 4-34
5.
Finally, left click on
Close
on the
Setup4PC
window (Figure 4-35).
30
