TechniSat AMC-6 Скачать руководство пользователя | Manualshive

Страница: 1 / 50

background image

Broadband

Modem Installation Guide

Release Versions AMC-6 72.0W Ku Band

•

StarConnect SAT VPN Software Version 2.02

•

Broadband4PC Software Version 4.3.2

Manual last revised 12/2006

Federal Communications Commission Radio Frequency Interference Statement

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. However, if this equipment does cause interference to radio or television
equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
• Use a shielded and properly grounded I/O cable and power cable to ensure compliance of this unit to the specified limits of the rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.

1

1
2
3
...
»

Содержание AMC-6



















































Отзывы:

Нет отзывов

Похожие инструкции для AMC-6

Бренд: IBM Страницы: 82

Бренд: Novatel Страницы: 35

Бренд: Linksys Страницы: 39

Бренд: Ebyte Страницы: 32

Бренд: SmartRG Страницы: 117

Бренд: NETGEAR Страницы: 2

Бренд: NETGEAR Страницы: 2

Бренд: SkyWave Страницы: 106

Бренд: X-Micro Страницы: 22

Бренд: 3Jtech Страницы: 21

Бренд: A-Link Страницы: 83

Бренд: adaptiveRF Страницы: 17

ARRIS SURFboard SBV2402

Бренд: CommScope Страницы: 40

715 P/N - 13H6715

Бренд: IBM Страницы: 47

Бренд: Hamlet Страницы: 16

DIAMONDLINK 3201

Бренд: Patton electronics Страницы: 128

Бренд: Ebyte Страницы: 17

Бренд: Ebyte Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды