TechniSat 0000/4814, Инструкция по эксплуатации

Страница: 24 / 36

24
Service instructions
This product is quality-tested and furnished with the legally-specified
warranty period of 24 months from the date of purchase. Please keep
your receipt as proof of purchase. In the event of warranty claims, please
contact the product dealer.
Note!
Should you experience a problem with this device, or for queries and
information,
our Technical Hotline is available:
Mon. - Fri. 8:00 am - 6:00 pm on tel.:
(0) 3925 9220 1800.
Should you wish to return the device, please do so to the following
address only:
TechniSat Digital GmbH
Service Center
Nordstr. 4a
39418 Stassfurt, Germany
Names of the companies, institutions or brands mentioned are
trademarks or registered trademarks of their respective owners.
1 Illustrations
1.1 Front
1.
STANDBY LED:
Shows the operating status. Green = operation,
red = standby.
2. Infrared sensor: Receives the signals from the remote control.
3. DISPLAY: Shows the current channel position number (in operation)
and the time (in standby).
Keypad on the top:
1.2 Back
1 2 3 4 5 6 7 8
1. LNB IN: For connection to the satellite system.
2. LOOP OUT: Loop-through of the satellite signal to another
receiver (not active in standby).
3. LAN: Network connection.
4. USB: Connection for USB mass storage
5. HDMI: Connection to a TV with HDMI input.
6. Power cord: For power supply to the receiver.
7. TV SCART: Connection to a TV with SCART input.
8. COAXIAL: Connection to a surround audio amplifier.