TechniSat 0000/3913, Руководство по эксплуатации

Страница: 84 / 180

84
14.4 Factory settings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations will no longer be received. In this case you can reset the device to
factory settings to delete all the saved stations and then initiate a new scan.
> Hold down the MENU button and use the < or > buttons to select the [Factory
setting]
item. Press the
OK
button.
> Using the < or > buttons, select the [Yes] item to restore to the factory setting
and press the OK button.
All previously stored stations and settings will now be deleted. The device is
now in the same state as when delivered.
> The display will show [Restart ...] and the device starts up with the
[Language] language selection. > Using the < or > buttons, select one of
the available languages and confirm the selection by pressing the OK button.
The device then automatically performs a complete scan in DAB mode. While
scanning, the display information shows the progress as well as the number
of digital radio stations detected. After completing the station scan, the first
DAB+ channel is played.
Alternatively, you can restore to factory settings using the 2 direct selection
buttons.
To do so, disconnect the Digitradio 3 from the power supply. Then hold down
the Menu and the Direct selection button 1 simultaneously and reconnect to
the power supply with the buttons pushed down.
The device now starts with the user language selection.
14.5 SW version
Under SW version you can retrieve the currently installed software version.
>
Press the MENU button and use the < or > buttons to select the [SW Version]
item.
> Press the
OK
button. The current software version is displayed.
14.6 USB settings
In as-delivered condition, the USB connection on the device is activated as the
charging function. This allows you charge, or supply a connected device with power,
regardless of the operational status of the device. You can use the MENU > USB
menu item to disable this charging function. If you will be primarily connecting USB
media, we recommend disabling the charge function.
BDA_DIGITRADIO_3_V11.indd 84 BDA_DIGITRADIO_3_V11.indd 84 10/11/2020 09:45 10/11/2020 09:45