TechniSat 0000/3913, Руководство по эксплуатации

Страница: 78 / 180

78
11.4 Repeat function
You can select whether a track, the entire folder/album or all of the tracks are to be
repeated.
>
Press the Repeat button multiple times.
The selected mode appears on the display ( Repeat Track 1x , Repeat Album ,
Repeat All ).
> To switch the function off again, press the
Repeat
track button as often as
required until the [Repeat off] appears.
11.5 Random playback
With the random generator, the tracks can be played back in a randomly mixed
order.
>
If you press the SHUFFLE button while playing, Random appears on the
display.
> To switch the function off again, press the SHUFFLE button again.
11.6 Programming function
With the programming function, you can play the tracks on a USB medium in an
order determined by you.
You can only undertake the programming if the device is in Stop Mode .
> Press the FAV button on the remote control.
> The Folder Number and the Track Number flash on the display. [P01] appears
to the right of this. P01 is the first programming slot. Any tracks you want can
then be set up in sequence in the programming slots.
> Use the F+ and F- buttons to select the folder where the track that you want
to put in Programme Location 1 is located.
> Use the Previous Track or Next Track to select the first track to be
programmed.
> Press the OK button to accept the track.
> Programming slot 2 ( P02 ) is then active. Proceed as described above to save
a track to programming slot 2. Do this to save the tracks you want to all the
programming slots.
> Press the Play/Pause button to play the programmed tracks.
In order to add tracks to the current programming, press the Stop button
once. You can then place additional tracks in the next unoccupied programme
location.
BDA_DIGITRADIO_3_V11.indd 78 BDA_DIGITRADIO_3_V11.indd 78 10/11/2020 09:45 10/11/2020 09:45