Technika TSSUR52S, Руководство пользователя

Страница: 10 / 17

PG 10
INSTALLATION
Instructions for Installation
Recommended Clearances
Rangehood
650
-750
Cooking Surface
Install Range Hoods in accordance with the manufacturer’s
instructions. For optimum performance, we recommend that all
Range Hood clearances be a minimum of 650mm to a maximum
of 750mm between the top of the cooking surface to the
underside of the Range Hood. The distance may be reduced to
600mm to align with AS/NZS 5601.
WARNING:
DO NOT penetrate any screws into the range hood
as this may result in electrical hazards.
WARNING:
Failure to install the screws or fixing device in
accordance with these instructions may result in electrical
hazards.
If a connection flue composed of two parts is used, the upper part
must be placed outside the lower part.
Exhaust air must not be discharged into a flue which is used for
exhausting fumes from appliances burning gas or other fuels.
Installation must comply with any local regulations concerning the
discharge of exhaust air.
Before proceeding with the assembly, remove the anti-grease
filter so that the unit is easier to handle. Prepare the hole in the
ceiling or wall for the evacuation of the air.
Dimensions
520