Technika TFL7W, Руководство пользователя

Страница: 38 / 48

38
Problem Possible Cause Try
Washing
takes longer
than specified
in the user
manual*
a) Water pressure is low. a) Product waits until taking
in adequate amount of water
to prevent poor washing
quality due to the decreased
amount of water. Therefore,
the washing time extends.
b) Voltage is low. b) Washing time is prolonged
to avoid poor washing results
when the supply voltage is low.
c) Input temperature of water is low. c) Required time to heat up the water
extends in cold seasons. Also,
washing time can be lengthened
to avoid poor washing results.
d) Number of rinses and / or amount
of rinse water have increased.
d) Product increases the amount
of rinse water when good rinsing
is needed and adds an extra
rinsing step if necessary.
e) Excessive foam has occurred
and automatic foam absorption
system has been activated due
to too much detergent usage.
e) Use recommended
amount of detergent.
Programme
time does not
countdown.
(On models
with display)*
a) Timer may stop during water intake. a) Timer indicator will not countdown
until the product takes in adequate
amount of water. The product will
wait until there is sufficient amount
of water to avoid poor washing
results due to lack of water. Timer
indicator will resume countdown
after this.
b) Timer may stop during heating step. b) Timer indicator will not countdown
until the product reaches the
selected temperature.
c) Timer may stop
during spinning step.
c) Automatic unbalanced load
detection system is activated
due to the unbalanced distribution
of the laundry in the product.
TROUBLE SHOOTING