Technika Professional Series TGO614ABK, Руководство пользователя

Страница: 34 / 39

PG 34
The panels of the adjacent cabinets must be made of heat resistant material. In particular,
cabinets with a veneer exterior must be assembled with glues which can withstand
temperatures of up to 75°C.
In compliance with current safety standards, contact with the electrical parts of the oven must
not be possible once it has been installed.
All parts, which ensure the safe operation of the appliance, must be removable only with the aid
of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4
wood screws into the 4 holes located on the perimeter of the frame.
Electrical connection
The appliance is usually supplied fitted with a power cord and 3 pin plug. Install the cooker
so that the plug is easily accessible. Plug the 3-pin plug into a properly earthed, 15A general
purpose power outlet preferably on a separate dedicated circuit. The supply cable should be
positioned so that it does not reach a temperature of more than75°C along its entire length.
If the appliance is not supplied with a plug or if connecting the cable directly to the mains,
connection to the electricity supply must be made by an authorised person in accordance
with the Wiring Rules AS/NZS3000. The installation must include a suitable isolating switch
with a minimum contact opening of 3mm between the appliance and the mains. The isolating
switch should be sized according to the load on the data label and should comply with current
regulations (the earth wire should not be interrupted by the circuit breaker).
Before making the connection check that:
• · the switch, wiring and electrical system can support the appliance load (see data plate);
• · the power supply system has an efficient earthing connection
• which complies with the provisions of current regulations;
• · the power outlet or omnipoar circuit-breaker is easily accessible once the cooker has been
installed.
Replacing the power supply lead
If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid hazard.
INSTALLATIONS