30
• The region number of the disc doesn’t match the region
number of this unit.
• Clean the disc.
• The disc is scratched.
• The plugs and jacks are dirty. Wipe them with a cloth slightly
moistened with alcohol.
• Clean the disc.
• There is no disc inside (“No Disc” appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• A non-PAL disc has been inserted. The unit and disc region
number are incompatible.
• Condensation may have formed inside the unit due to a
sudden change in temperature. Wait about an hour for it to
clear and try again.
No picture.
The picture is not clear.
Severe hum or noise is
heard.
The disc does not play.
trouBLe SHootinG GuiDe
SyMPTOM
CAUSE (AND REMEDy)
• Check that the AC power cord is connected.
• Turn on the unit.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with a new ones.
No power.
The remote does not
function.
• Make sure that you have selected DVD mode.
• The system is in pause mode. Press the
PLAY button to
return to normal play mode.
• Fast forward or fast reverse is engaged. Press the
PLAY
button to return to normal play mode.
• Make sure that AUDIO / VIDEO output and AV IN input
connections are correct.
• The DTS DVD disc cannot be decoded to have speaker
output.
• This unit is too hot, shut off the unit for 30 minutes to cool
down.
DVD
No sound or only a
very low-level sound is
heard.
PLV31170S1E4 IB CI DTV 080131.indd 30
2/1/2008 3:16:37 PM
