background image

English   

- 3 -

Information for Users  in European 

Union Countries

This  symbol  on  the  product  or  on  its 

packaging  means  that  your  electrical 

and  electronic  device  should  be 

disposed  at  the  end  of  its  service  life 

separately from your household wastes. 

There are separate collection systems 

for recycling in EU.
For  more  information,  please  contact 

the local authority or the dealer where you purchased 

the product.

Disconnecting the Device

The mains plug is used to disconnect TV set from 

the  mains  and  therefore  it  must  remain  readily 

operable.

Headphone Volume

Excessive sound pressure from earphones 

and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached 

to the wall in accordance with the installation instructions 

when mounted to the wall (if the option is available).

LCD Screen

The LCD panel is a very high technology product with 

about a million thin film transistors, giving you fine 

picture details. Occasionally, a few non-active pixels 

may appear on the screen as a fixed blue, green or 

red point. Please note that this does not affect the 

performance of your product.

Warning

Do not leave your TV in standby or operating mode 

when you leave your house.

Connection to a Television Distribution 

System (Cable TV etc.) from Tuner

Device  connected  to  the  protective  earthing 

of  the  building  installation  through  the  mains 

connection  or  through  other  apparatus  with  a 

connection to protective earthing-and to a television 

distribution system using coaxial cable, may in some 

circumstances create a fire hazard.

Connection  to  a  cable  distribution  system  has 

therefore to be provided through a device providing 

electrical isolation below a certain frequency range 

(galvanic isolator, see EN 60728-11).

If any solid object or liquid falls into the cabinet, unplug 

the TV and have it checked by qualified personnel 

before operating it any further. 

Cleaning

Before  cleaning,  unplug  the  TV  set 

from the wall outlet. Do not use liquid or 

aerosol cleaners. Use soft and dry cloth.  

Ventilation

The slots and openings on the TV set are intended for 

ventilation and to ensure reliable operation. To prevent 

overheating, these openings must not be blocked or 

covered in anyway.

Heat and Flames

The set should not be placed near to open 

flames and sources of intense heat such 

as an electric heater. Ensure that no open 

flame sources, such as lighted candles, 

are  placed  on  top  of  the  TV.  Batteries 

should not be exposed to excessive heat 

such as sunshine, fire or the like.

Lightning

In  case  of  storm  and  lightning  or  when 

going  on  holiday,  disconnect  the  power 

cord from the wall outlet. 

Replacement Parts

When replacement parts are required, make sure that 

the service technician has used replacement parts, 

which are specified by the manufacturer or have the 

same specifications as the original one. Unauthorized 

substitutions  may  result  in  fire,  electrical  shock  or 

other hazards.  

Servicing

Please  refer  all  servicing  to  qualified 

personnel.  Do  not  remove  the  cover 

yourself as this may result in an electric 

shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable and 

should principally be recycled. Packaging materials, 

such as foil bag, must be kept away from children.

• Batteries, including those which are heavy metal-

free,  should  not  be  disposed  of  with  household 

waste.  Please  dispose  of  used  battery  in  an 

environment  friendly  manner.  Find  out  about  the 

legal regulations which apply in your area.

•  Cold  cathode  fluorescent  lamp  in  LCD  PANEL 

contains a small amount of mercury; please follow 

the local laws or regulations for disposal.

Содержание 32-2010
































Отзывы: