06
Safety precautions
(Continued)
Battery
•
Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
•
Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
-
Remove the battery if you do not intend to
use the remote control for a long period of
time. Store in a cool, dark place.
-
Do not heat or expose to flame.
-
Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time
with doors and windows closed.
-
Do not take apart or short circuit.
-
Do not recharge alkaline or manganese
batteries.
-
Do not use batteries if the covering has been
peeled off.
-
Do not mix old and new batteries or different
types at the same time.
•
When disposing of the batteries, please
contact your local authorities or dealer and ask
for the correct method of disposal.
•
Avoid the use in the following conditions
-
High or low extreme temperatures during
use, storage or transportation.
-
Replacement of a battery with an incorrect
type.
-
Disposal of a battery into fire or a hot oven,
or mechanically crushing or cutting of a
battery, that can result in an explosion.
-
Extremely high temperature and/or
extremely low air pressure that can result in
an explosion or the leakage of flammable
liquid or gas.
Speakers
•
Be cautious when children are near.
•
Do not insert a finger into the bass reflex ports
on the rear of this unit. Pay close attention to
children as doing so may cause personal injury.
•
Do not carry this unit by holding the subwoofer
of the bottom of this unit.
•
Do not touch the speaker diaphragm on the
bottom of this unit. Doing so may deform the
diaphragm, and as a result, sound may not be
output correctly.
(Back of product)
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 3-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating of
3-ampere and that it is approved by ASTA or BSI
to BS1362.
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased
from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to
the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the
instructions below. Illustrations may differ from
actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse
cover.
Figure A
Figure B
Fuse
(3 ampere)
Fuse
(3 ampere)
