13
Wired LAN connection
Broadband router, etc.
LAN cable
(not supplied)
1 Disconnect the AC mains lead.
2 Connect this unit to a broadband
router, etc. using a LAN cable.
3 Connect the AC mains lead to this
unit, and press [ ].
(
11)
•
When the connection is established,
“
” is displayed.
4 Press [>SELECT<] to select
“Chromecast built-in”.
5 Start the “Google Home” app and
follow the on-screen instructions to
set up a connection.
(
14)
Note
•
While the AC mains lead is disconnected, the
LAN cable must be connected or disconnected.
•
Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
•
Inserting any cable other than a LAN cable in
the LAN port can damage the unit.
•
When a LAN cable is connected, the Wi-Fi
function may be disabled.
Wireless LAN connection
■
Preparation
Disconnect the AC mains lead.
Disconnect the LAN cable.
Place this unit as close to the wireless router
as possible.
Connect the AC mains lead to this unit. (
11)
Note
•
The setting will be cancelled after the set time
limit. In that case, try the setting again.
•
To cancel this setting in the middle, press [
]
or turn the unit to standby mode.
•
When the connection is established, “
” is
displayed. (
14)
Network setting for the first time
using the “Google Home” app
1 Press [
] to turn this unit on.
•
“Wi-Fi Setup” is displayed.
2 Press [ ], [ ] to select “Yes” and
then press [OK].
3 Start the “Google Home” app and
follow the on-screen instructions.
(
14)
Note
•
This unit will be displayed as “Technics-SC-
C70MK2-
****
” if the device name is not set.
(“
****
” stands for characters unique to each
set.)
•
You can check your network information (SSID,
MAC address and IP address) from the “Google
Home” app or “Technics Audio Center” app.
•
Some items on the “Google Home” app are
irrelevant to this unit.
•
When this unit is switched to standby mode
and turned on before the Wi-Fi setting is
complete, “Wi-Fi Setup” is displayed. Set “Wi-Fi
Menu” to “Off” to turn off the display.
