Technicolor TG587n v3, Руководство по установке и эксплуатации

Страница: 84 / 98

78
9 INTERNET SECURITY
DMS-CTC-20101206-0017 v1.0
9.1.1 Configuring Content-based Filtering
Requirements
Content-based filtering must be activated on your Technicolor Gateway.
For more information, see “Activating content-based filtering” on page 76 .
Accessing the configuration page
Proceed as follows:
1 Browse to the Technicolor Gateway GUI .
2 On the Toolbox menu, click Parental Control .
3 On the Navigation bar , click Configure .
4 Under Content-Based Filtering you can change the settings of the content-based filter.
Configuration
Under Content-Based Filtering :
1 Select Use Content-Based Filter check box (if needed).
2 In the Action for uncategorised sites list, select a default action for sites that have not yet been categorised.
3 Under Content Level , select the content level you want to use.
If you want a more detailed view of the content that will be blocked for this level, click the Edit link next to the content
level.
If needed, you can change the Name , Description and Configuration of the content level.
4 Click Apply after you have made your changes.
Creating your own content level
Proceed as follows:
1 In the Pick a task list, click Create a new content level .
2 Enter a Name and Description for your content level and click Next .
3 Under Configuration , select:
 Clone Existing Level if you want to start from an existing level. You can now select the level that you want to clone.

White list if you want to block everything and select which content should be allowed.
 Black list if you want to allow everything and select which content should be blocked.
Click Next .
4 Under Configuration :
 Select the check boxes of the categories/groups you want to allow.
 Clear the check boxes of the categories/groups you want to block.
5 Click Apply .
6 Configure the content-based filter with the new level. For more information, see “Configuration” on page 78 .