manualshive.com logo in svg

Technicolor TD5130, Руководство пользователя, Страница: 73 / 106

Поделиться
Скачать
Technicolor TD5130 Скачать руководство пользователя страница 73

Advanced 
 

6.

 

Enter values for IGMP Last Member Query Interval, IGMP Last Member Query 
Count, Query Response Time, Host Timeout, Leave Timeout, or IGMP Max 
Groups. If you are unsure about them, leave the default values. 

7.

 

Check the Enable IGMP box for WLAN, LAN1, LAN2, LAN3, or LAN4 to enable 
IGMP in the respective network connection. 

8.

 

Click the Apply button to save and apply changes. 

6.12.2

 

MLD 

Multicast Listener Discovery (MLD) is a component of IPv6. MLD manages group 
membership in IPv6, similar to IGMP in IPv4. 
To access the Multicast MLD page, click ADVANCED > Multicast > MLD or click the 
MLD button. 

MLD Proxy 

MLD proxy enables your Wireless Gateway to forward multicasts traffics between 
LAN and WAN networks in the IPv6 protocol.  

1.

 

On MLD Option, select Proxy. 

 

2.

 

Select the DSL Interface to implement IGMP. Connected interfaces are 
displayed in the Connected Interfaces fields. 

3.

 

To enable fast leave option, check the Fast Leave box. 

 

Wireless ADSL2+ Gateway 

 

   

73 

Содержание TD5130











































































































Отзывы:

Нет отзывов