manualshive.com logo in svg

Technicolor TD5130, Руководство пользователя, Страница: 105 / 106

Поделиться
Скачать
Technicolor TD5130 Скачать руководство пользователя страница 105

Appendix 
 

EN 300 328 V1.7.1 (2006-10) 
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband 
transmission systems; Data transmission equipment operating in the 2,4 GHz ISM 
band and using wide band modulation techniques; Harmonized EN covering essential 
requirements under article 3.2 of the R&TTE Directive 
EN 301 489-1 V1.8.1 (2008-04) 
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic 
Compatibility (EMC) standard for radio equipment and services; Part 1: Common 
technical requirements 
EN 301 489-17 V2.1.1 (2009-05)  
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic 
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for 
Broadband Data Transmission Systems. 
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use 
in all EU member states and EFTA countries, except in France and Italy where 
restrictive use applies. 
In Italy the end-user should apply for a license at the national spectrum authorities in 
order to obtain authorization to use the device for setting up outdoor radio links 
and/or for supplying public access to telecommunications and/or network services. 
This device may not be used for setting up outdoor radio links in France and in some 
areas the RF output power may be limited to 10 mW EIRP in the frequency range of 
2454 – 2483.5 MHz. For detailed information the end-user should contact the 
national spectrum authority in France. 

  

 

 

 

Wireless ADSL2+ Gateway 

 

  

 105 

Содержание TD5130











































































































Отзывы:

Нет отзывов