Technicolor TD5130 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 106

Technicolor TD5130 Скачать руководство пользователя страница 42

Advanced

WMM (Wi-Fi Multimedia) — Select whether to enable or disable WMM. The WMM
feature enhances the Quality of Service (QoS) of a network that is used by
multimedia applications such as Voice-over-IP (VoIP) and video. If WMM is enabled,
multimedia applications on your network have priority over regular data packets,
allowing multimedia applications to run smoother and with fewer errors.
WMM APSD — If WMM is enabled, you can also select whether to enable or disable
WMM APSD (Automatic Power Save Delivery). APSD manages radio usage for
battery-powered devices to allow longer battery life in certain conditions.
Fragment Threshold — Fragment threshold refers to the maximum size of a packet
before data is fragmented into multiple packets. The default and recommended
value is 2346 bytes. If you experience a high packet error rate, you may slightly adjust
the value. Setting the fragment threshold too low may result in poor network
performance.
RTS Threshold — The default and recommended value is 2347. Should you encounter
inconsistent data flow, only slight modifications should be made.
Beacon Interval — Enter a value in milliseconds. A beacon is a packet that is sent out
by the Wireless Gateway to synchronize the wireless network. The beacon interval
value indicates the frequency interval of the beacon. The default value is 100.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.

Settings for 11n Mode Only

The following settings are applicable only to wireless devices in the 802.11n mode.
Channel Width — Select the channel bandwidth: 20MHz or 40MHz.
20/40MHz Coexit — Check this box to enable both 20MHz and 40MHz channel
bandwidth.
Legacy Protection — Check to enable legacy protection.
Control Sideband — Select to control Upper or Lower sideband.
Aggregation — Check to enable aggregation
Short GI — Check to enable short guard interval (GI) function. Short GUI makes guard
interval sending time shorter and thereby increases throughput.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.

Wireless ADSL2+ Gateway

42

«
...
40
41
42
43
44
...
»

Содержание TD5130











































































































Отзывы:

Нет отзывов