Technicolor TB30 Скачать руководство пользователя страница 197

Страница: 197 / 266

TB30s SIP Administrator Guide v1.3

Page 190 of 259

Login/logout – disable Subscribe to dialog

In the context of the Login/Logout feature, the phone subscribes to the

Dialog Event

before trying to register with a dynamic personal profile or

static personal profile, to ensure any phone potentially registered with this

profile is not in conversation or ringing).

Some servers don‟t allow such subscriptions, or the real phone number is
different from the Authentication ID (login parameter).

So the Login procedure is aborted due to non response from server side, or
to an error message other than expected 404 Not Found.

To be able to set up a simple Login/Logout procedure without sending such

Subscribe to Dialog event, a new parameter will be created:

If value=0 => the phone will skip the Subscription to the dialog event
and directly Register with the personal dynamic profile.

If value=1 => Enable Subscribe to Dialog event before Register. If the
SUBSCRIBE gets a 404 Not Found response, then PhoneA will consider

the account is not in use and will proceed with the login process. If
receives a Notify with the status as “terminated” then the login can go

on. If it‟s not the case, the phone must abort the login procedure.

Default value will be 1 which means the phone will Subscribe to dialog event
before registering (behavior prior to this new sw release).

Feature Activation

A) Through the WebGui:

This feature can not be configured through the Web.

B) Through Telnet:

For this purpose, a new parameter has been created, described as follow:

sip set

subdlgbflogin_flag

[0(Disable)/ 1(Enable)]

To configure, open a command line console, and telnet the phone:

C) Through APS:

For this purpose, a new parameter has been included in the [sip] section of
the Common/MAC config files, to be able to configure the feature.
Remember the proper APS configuration to activate the Login/Logout feature

at the highest feature level:

[ipp]
ManualLog=1

Содержание TB30











































































































































































































































































Результаты поиска

Содержание TB30

Отзывы:

Похожие инструкции для TB30

Бренды по названию

Популярные бренды

Technicolor TB30, Руководство администратора

Результаты поиска

Содержание TB30

Отзывы:

Похожие инструкции для TB30

Бренды по названию

Популярные бренды