Technica Engineering GmbH
Leopoldstr. 236
80807 München
Email:
Web:
www.technica-engineering.de
4 Configuration
The MediaConverter is configured by 2 DIP Switches on the front of the device.
DIP Switch 1:
ON = BroadR-Reach Port is set to Master.
OFF = Slave
DIP Switch 2:
ON = BroadR-Reach Port is set to FullOut.
OFF = HalfOut
Note:
In a BroadR-Reach Link one device has to be set to Master, the other has to
be set to Slave Mode.
Note:
The MediaConverter should
always
be set to
FullOut
. HalfOut was a former
configuration for EMC optimization but will cause an instable link.
