Technibel DSAV122C5TA, Руководство по эксплуатации

Страница: 6 / 52

FLAP BUTTON
WARNING: inactivated button
6
REMOTE CONTROL UNIT
TRANSMITTER
When you press the buttons of the remote control unit,
the mark appears on the display to transmit the
setting changes to the receiver in the air conditioner.
TEMPERATURE SETTING BUTTONS
(cooler)
Press this button to decrease the set temperature.
(warmer)
Press this button to increase the set temperature.
SENSOR
A temperature
sensor inside the
remote control unit
detects the room
temperature.
1-HOUR TIMER
When pressing this button,
regardless of whether the
unit is ON or OFF, the unit
operates for 1 hour and
then automatically stops.
TIMER AND PRESENT TIME SETTING BUTTONS
Setting can be activated by pressing the “Program” button (the
time indication on display alone flashes).
For details see “Setting the timer”.
Hours
setting
Minutes
setting
HH
MM
Inactivated position.
Setting present time. (Flashing).
(Use TIME SET buttons)
Timer setting: to start the unit by
timer. (Flashing).
Time setting: to stop the unit by timer.
(Flashing).
Selection of the following functions:
• Setting the present time.
• ON-OFF Timer.
PROGRAM Button
ON/OFF OPERATION BUTTON
This button turns the air conditioner ON and OFF.
COVER
The cover opens by
sliding it downward.
TEMPERATURE
SENSOR
SELECTOR
DISPLAY
Information is displayed when the remote control unit is switched on.
If the air conditioner is switched off, the display shows the operation
mode, the clock (hour/minutes) and the room temperature.
1-Hour timer on
Night
setback mode
Selected temperature
for 5 seconds
Room temperature
detected by the
sensor of indoor unit
Displayed when
trasmitting data
Displayed when the
temperature setting is at
the upper or lower
allowable limit
16 C min.
30 C max.
Timer switched
on OFF
Timer switched
on daily
program
Timer switched
on ON
Clock
(hours-minutes)
Operation mode
Fan
Dehumidification (dry)
Heating
Cooling
Automatic
Fan speed
Automatic
High speed
Medium speed
Low speed
Room temperature
Flap oscillation
switched on
NIGHT SETBACK BUTTON
For details, see "Night setback mode".
When you press this button in the COOL, HEAT or DRY
mode, the mark appears on the display and the
microcomputer in the remote control unit will adjust the
set temperature to save energy.
Blank. The timer does not operate.
Timer switched ON..
The air conditioner will start at the
set time.
Timer switched on daily
program.
The air conditioner stops and
starts, or starts and stops, at the
set times every day.
Timer switched OFF.
The air conditioner will stop at the
set time.
TIMER BUTTON (timer setting)
BATTERY
REPLACEMENT
BUTTON
EG
FAN SPEED SELECTOR BUTTON
Fan speed is automatically
selected by the microcomputer.
High speed.
Medium speed.
Low speed.
HH
MM
MODE SELECTOR BUTTON
Press this button to modify the air conditioner mode.
(automatic)
When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room temperature
and automatically switches to the "cool" or "heat" mode.
(heating)
The air conditioner makes the room warmer.
(dry)
The air conditioner reduces the humidity in the room.
(cooling)
The air conditioner makes the room cooler.
COOL / DRY / HEAT Models