EG
I
F
D
E
INSTALLATION INSTRUCTIONS
-
Floor or celling mounted split units
-
REMOTE
1
CONTROL UNIT
37.4163.298.0 02/2006
Tools required for installation (not supplied)
1
1. Standard screwdriver
1
2. Phillips head screwdriver
1
3. Knife or wire stripper
1
4. Tape measure
1
5. Level
1
6. Sabre saw or key hole saw
1
7. Hacksaw
1
8. Core bits ø 5
1
9. Hammer
10. Drill
11. Tube cutter
12. Tube flaring tool
13. Torque wrench
14. Adjustable wrench
15. Reamer (for reburring)
16. Hex. key
DECLARATION OF CONFORMITY
This product is marked as it satisfies Directives:
– Low voltage no. 73/23 EEC and 93/68 EEC.
– Electromagnetic compatibility no. 89/336 ECC, 92/31 EEC and 93/68 EEC.
This declaration will become void in case of misuse and/or non observance though partial of manufacturer's installation and/or
operating instructions.
Power Supply:
220 - 240 V ~ 50 Hz
Model Combinations
Combine indoor and outdoor units only as listed below.
Indoor Units
Outdoor Units
KPAF126R5IA-
GRF126R5IA-
PARTS
FIGURE
Q.TY
PARTS
FIGURE
Q.TY
ACCESSORY FOR UNDER - CEILING OR WALL INSTALLATION (ALREADY INSTALLED)
BRACKET
2
WASHER - SPRING WASHER
4
BOLT M8
4
PARTS
FIGURE
Q.TY
PARTS
FIGURE
Q.TY
PARTS
FIGURE
Q.TY
BRACKET
1
ACCESSORIES SUPPLIED WITH THE UNIT
RAWL PLUG
2
CLAMPER
1
DRAIN
1
ELBOW
TAPPING
2
SCREW 4x30
FULL SCALL
1
DIAGRAM
SIDE PANELS
2
(LEFT AND RIGHT)
TAPPING
4
SCREW 4,2x9,5
OPERATING LIMITS
Cooling Maximum conditions
Outdoor temperature :
46°C D.B.
Room temperature
:
32°C D.B. / 23°C W.B.
Cooling Minimum conditions
Outdoor temperature :
-10°C D.B.
Room temperature
:
21°C D.B. / 15°C W.B.
Heating Maximum conditions
Outdoor temperature :
24°C D.B. / 18°C W.B.
Room temperature
:
27°C D.B.
Heating Minimum conditions
Outdoor temperature :
–15°C D.B. / –16°C W.B.
MOUNTING PADS
4
