Techni-Lux IL-TRACKER250S/1, Руководство пользователя

Страница: 9 / 28

9
Power
Do not apply power to the fixture until input voltage setting and power source are verified.
For protection against electric shock, fixture must be connected to suitable earth ground.
Make sure fixture is cool and disconnected from power mains before any service.
The listed current rating is its average current draw under normal conditions. All fixtures must be
powered directly from a switched circuit. This fixture cannot be run on a rheostat or dimmer
circuit even if used solely for a 0% to 100% switching. Before applying power to a fixture, check
that the fixture’s input voltage matches the power source voltage. Consult a qualified electrician
if there are any concerns about proper connection to power.
Pin Cable (EU)
International
Brown
Light blue
ellow/Green
Y
Black
White
Green
Live
Neutral
Earth
L
N
Cable (US)
Voltage Selection
Make sure fixture is cool and disconnected from power mains before any service.
This fixture ships from the factory set for 115v 60Hz operation unless otherwise specified
or marked. Before accessing the Transformer Connection, make sure fixture is cool and
physically disconnected from power mains. Remove the metal cover that extends
across the base from the Power Input to the Display. It is held by 9 Phillips screws. One
connection must be moved to adjust input voltage and one to adjust Line Frequency.