manualshive.com logo in svg

technetix DBD-1200, Руководство пользователя, Страница: 7 / 37

Поделиться
Скачать
technetix DBD-1200 Скачать руководство пользователя страница 7

5

Technetix Group Limited

Rev.1.0.1_0217

Chapter 2: RF amplifier

1.  Removable power supply under cover plate 
2.  Optional local powering port (mains or 65 VAC) 
3.  Upstream amplifier module 
4.  Upstream auxiliary plug-in JXP attenuator location 
5.  Digital control module 
6.  Digital control module USB connection 
7.  Downstream amplifier module 
8.  Downstream cable simulator JXP location (can be  
  used for other types of JXP plug-in) 
9.  Input and output diplex filters.42/54, 65/85, 85/102,  
  85/105 and 204/258 options 
10. Input bypass splitter location: 2-way splitter 
  PI-SPL-2W-12G; directional coupler tap 8dB 
  TX DC-8; tap 12 dB TX DC-12 
11.  Port power directors/fuses (micro2 automotive) 
12. Input -20 dB test point (omnidirectional) 

13. Output downstream -20 dB test point (upstream  
  injection -20 dB test point) 
14. Output splitter location: 2-way splitter 
  PI-SPL-2W-12G; directional coupler tap 8dB 
  TX DC-8; tap 12dB TX DC-12 
15. Input RF port - PG11 thread with optional 5/8”  
  reducing ring for 5/8” threaded connectors 
16. Port 4 RF bypass output port - PG11 thread 
  with optional 5/8” reducing ring for 5/8” 
  threaded connectors 
17.  Port 3 RF output port- PG11 thread with optional 5/8”  
  reducing ring for 5/8” threaded connectors 
18. Port 2 RF output port- PG11 thread with optional 5/8”  
  reducing ring for 5/8” threaded connectors 
19. Port 1 RF output port- PG11 thread with optional 5/8”  
  reducing ring for 5/8” threaded connectors 

1

3

5

7

9

9

10

15

16

17

18

19

13

14

12

11

6

8

4

2

Содержание DBD-1200






































Отзывы:

Нет отзывов