17 Technetix Group Limited
Rev.1.0.1_0217
2. Set the
Amplifier Type
to its respective application followed by the
Diplexer Type
and the upper equaliser hinge
point,
End Frequency.
Once these values are set in the application, click on
Send to amp
to set these values electronically.
3. The downstream
Inter-stage equaliser
and Inter-stage attenuator can be set as required by the network/system
design documentation in two ways. You can set them in the amplifier schematic inter-stage tabs or in the table to
the right of the application screen (see the screen shot below). Once the values are set in the application, click on
Send to amp
to set these values electronically.
Содержание DBD-1200
Страница 37: ...Technetix Group Limited Rev 1_0 1_0217 ...