Techne Tecal 650H, Руководство оператора

Страница: 29 / 30

PAGE 27
T E C A L 6 5 0 H O P E R A T O R ’ S M A N U A L
GLOSSARY
Block temp. The current temperature of the heat transfer
block.
Cursor The flashing bar on the LCD screen which
indicates where the next character is entered.
Hold time The duration for which the block is maintained
at a given temperature. Note that the clock
counter which measures the hold time is
started when the temperature is within 2°C of
the set point temperature.
Pause When you press the PAUSE button, the
program halts but maintains the block at the
temperature reached immediately before the
key was pressed. (Note that it takes several
minutes for the temperature of the block to
reach equilibrium.) Press the
PAUSE button
again to continue.
Program A program is made up of a sequence of
segments. The sequence may be executed
once or several times
PRT Platinum Resistance Thermometer.
Ramp rate The rate at which the block is heated or cooled.
Set Point Temp . The temperature to which the calibrator is
set to control.