Techne Tecal 650H, Руководство оператора

Страница: 17 / 30

PAGE 15
T E C A L 6 5 0 H O P E R A T O R ’ S M A N U A L
TECAL CALIBRATOR
ESC
" #
ENTER
ABCD EFGH IJKL
ON/OFF
$ %
PAUSE
MNOP QRSTU VWXYZ (0-9)
When you Switch On
When you first switch on, the display will show a choice of options.
MAIN MENU
m anual mode
program mode
configure
Use the " # keys to toggle between the options until the cursor is on the
required one.
Press the ENTER key when the cursor is on the option you want and this will
take you into the screen you wish to use.
Configure Menu
To configure the unit to the settings you want, use the
# #
# # # key to put the cursor
on configure then press the ENTER key.
MAIN MENU
manual mode
program mode
c onfigure
The following screen will appear:
CONFIGURE
Switch
no yes Hold
Temperature °C °F
user probe no yes
Use the ENTER key to move to the field you wish to change. Use the " " " " " # # # # #
keys to change the setting and the ENTER key to accept the change. Other
keys have no effect when you are in the configure screen.
Switch/yes or Hold and user probe/yes are mutually exclusive when one or
the other is selected.
Switch/yes (Hold) will record/display the switch contact status. Switch HOLD
will also halt the calibrator at the temperature at which it switched over, until the
PAUSE key is pressed. (Note thet the unit may require time to settle before a
valid reading is available.)