5
Model: TX-203,TX-204,TX-228; Article No. 5021,5023,5040; 10/2022
⚫
Make sure that the device is well secured during operation and cannot be tripped
over by cables.
⚫
Never use the device after a malfunction, e.g. if the device has been dropped into
water or damaged in any other way.
⚫
The manufacturer assumes no responsibility in the event of incorrect use resulting
from failure to follow the instructions for use.
⚫
Modification or alteration of the product will affect the product safety. Caution: Risk
of injury!
⚫
All modifications and repairs to the device or accessories may only be carried out
by the manufacturer or persons expressly authorized by the manufacturer for this
purpose.
⚫
Make sure that the product is operated from a power source that is easily accessible
so that you can quickly disconnect the device from the mains in case of an emergency.
⚫
Never open the product without authorization. Never carry out repairs yourself!
⚫
Handle the product with care. It can be damaged by shocks, impacts or falling from
even a low height.
⚫
Keep the product away from extreme heat.
⚫
Never immerse the product in water or other liquids.
⚫
Technical changes and errors excepted!
Warning!
⚫
Do not install the device if the AC cable of the micro inverter is
damaged or broken.
⚫
Before installing or using the micro inverter, read carefully all the
instructions and safety notes in the user manual and on the device and
other solar equipment.
⚫
Do not connect the micro inverter to the operator grid until you have fully
implemented the installation process and received confirmation / approval from the
grid operator.
⚫
Do not tamper with or manipulate the micro inverter or other parts of the equipment
under any circumstances.
⚫
Risk of damage due to improper modifications!
⚫
Keep all contacts dry and clean!
Caution Risk of electric shock!
⚫
When operating this device, certain parts of the device are under
dangerous voltage, which can lead to serious physical injuries or death.
Therefore, follow the following instructions to minimize the risk of injury.
⚫
Disconnect the plug connection only in a de-energized state!
⚫
Before carrying out visual inspections and maintenance work, check that the power
supply is switched off and secured against being switched on again.