Monitor
Do not exert any pressure on and keep sharp objects away from the display.
There is a risk of injury if the display is broken. Wear gloves if you are
gathering broken parts. If the monitor becomes scratched or damaged in any
way, take special care to ensure that no liquid leaks from the monitor.
If liquid has leaked and
(1) comes into contact with your skin, wipe it off with a clean cloth and rinse
the area of contact with a large amount of water. Consult a doctor if
necessary.
(2) and comes into contact with your eyes, rinse them with running water for
at least 15 minutes and then go to a hospital immediately.
(3) and you swallow the liquid, first rinse your mouth with water and then drink
a large amount of water. Consult a doctor immediately!
Operational safety
The housing of the endoscope camera must not be opened because it
does not contain any parts that require maintenance.
Ensure that the device is not subject to extreme temperature fluctuations,
since this could result in condensation and electrical short circuits.
If the device was subjected to extreme temperature fluctuations, wait ~2
hours until the device has reached ambient temperature before use.
Keep the control panel (TFT monitor with handle) away from moisture and
ensure that no foreign objects penetrate the device.
Never place any objects filled with liquids e.g. vases or drinks, on or near the
device.
Avoid vibrations, dust and heat, and ensure that the device is not exposed to
direct sunlight or bright artificial light. The device could be damaged as a
result.
Ensure that no fire sources (e.g. burning candles) are placed on or near the
device.
