Use of the device
Switching the endoscope camera on and off
The endoscope camera is switched on and off by pressing the on/off switch
[3] for approximately 2 seconds. The power indicator [2] lights up green and,
after a short delay, the image is shown on the monitor [1].
Lighting
The camera head is equipped with 4 LEDs. This lighting can be switched on
with the illumination button [5]. This button can also be used to gradually
increase the brightness of the LEDs by pressing it several times. 8 different
levels can be set. When the highest level is reached and the illumination
button [5] is pressed again, the lighting switches itself off.
Monitor brightness
The brightness of the monitor can be changed with the brightness adjustment
display button [7]. The brightness of the monitor is gradually increased when
this button is pressed several times. 8 different levels can be set. When the
highest level is reached and the brightness adjustment display button [7] is
pressed again, the brightness adjustment is reset to the default value.
Changing the display
The camera image can be rotated by 180° and mirrored vertically or
horizontally by pressing the view/rotate image button [4]. This setting enables
you to display four different views of your image. If the display is changed, the
default display is shown after the camera has been switched off and then
switched on again.
Video-out function
You can use this function, for example, to display the images of the camera
on a TV. Depending on the device on which you want to perform the
playback, you will require a connection cable which must have a 3.5mm jack
plug on one side for connecting to the video-out port [9] of the endoscope
camera. Put the Cinch (RCA) connector into your playback device. For further
details, read the user manual for your playback device.
To use the video-out function, proceed as follows:
Switch off the endoscope camera.
Connect the video-out port [9] of the endoscope camera to your
playback device. Note the corresponding user manual to adjust your playback
device correctly.
