10
Note:
When you make audio CDs, you are aware of the legal basis and do not
violate the copyrights of third parties. Always keep the disc tray closed to
prevent dust from accumulating on the laser optics. The device can play
normal audio CDs (CD-DA).
Other file extensions, e.g. * .doc, * .txt, * .pdf, * .mp3, etc. are not supported.
Music files or playlists with the extensions * .AAC, * .DLF, * .M3U and * .PLS or
* .mp3 cannot be played back. If the tracks / files are defective, the next track /
file is played. It is an advantage to burn the CD at low speed and set the CD as
a single session and finalized.
How to operate the CD player
Which CD you can use
The CD player is compatible with CD, CD-R, CD-RW media. You can play all
the discs mentioned here with this device without an adapter.
Do not play any other media such as DVDs, etc.
When you are transporting the device, remove the disc from the drive. This
prevents damage to the CD player and the disc.
How to insert a CD
Before using for the first time: Remove the transport protection from the CD
compartment. Set selector (22) to CD/AUX. After that, insert a CD: lift the CD
lid (9) with OPEN / CLOSE
up. The display shows “00”. The lid opens upwards.
The lid must not be obstructed.
Note:
When the CD compartment is open, make sure that no foreign objects can
enter the device. The lens of the laser scanner must never be touched.
Open the CD compartment only when the CD is at standstill.
Carefully insert the CD with the printed side facing upwards and press it
onto the holder lock. Make sure the CD is not tilted.
Close the disc tray. The CD is read. After the read-in process has been
completed, press Play/Pause/Power button (10) to start the first track. The
current track number appears.
