Techna-Tool BK MIKRO 7, Техническая документация инструкция

Страница: 20 / 42

BK Mikro 7 Manual OI: BK MIKRO 7
Page 18 Rev. 2.00 dated 20.01.2006
"Clockwise / Counter-clockwise" switch (CW/CCW)
Direction of rotation, i.e. direction to which scanner moves starting from stop position.
Clockwise = When rotating to the right
Scanner viewed from behind (the connection side),
looking up length of scanner.
Fig. 3-6: Definition of the rotation direction
Note: Switch position may be changed by selection inputs S1, S2 and S3
(see table in section "Selection inputs").
"Tolerance range" switch
Range of tolerance for "O.K." message referred to the desired position,
i.e. position learned by "Teach-in" or set by switches:
small ±3°
great ±10°
Fig. 3-7: Range of tolerance
Note:
No range of tolerance exists for scanning in one direction using switch mode.
"Scanner" switch
Selection of the scanner.
BK7SC Scanner BK7SC, i.e. use scanner with mechanical backstop!
BK7RLSC Scanner BK7RLSC, i.e. use scanner without mechanical backstop!
Stop position
Scanning wand
Scanner
Object
Desired position
great
small