19
TL-CAV-01-HDV User Manual
www.tlnetworx.com
²
Click “
Save
” to save these settings.
4.6.3
Command Menu
In setting menu, click “
Command
” to access command menu as shown in the below:
Figure 4-7 Command Menu
In this interface, you can:
²
Enter the commands of display in
Display On
/
Display OFF
/
Input Select
box to
turn on/turn off display or select signal source.
²
Select the
Hex
checkbox to set the format of commands as hexadecimal. The
default is character format.
²
Modify the baud rate, the default value is 9600 and the selectable range is
2400~115200.
²
Set the
Input Select Delay.
The default time is 5 seconds. Send the command
typed in
Display ON
box, wait 5 seconds, and then send the command typed in
Input Select
box.
²
Different displays may require a specific command ending, such as a carriage
return (CR) or line feed (LF). Please check the device manufacture's manual and
select the appropriate command to broadcast at the end of the RS232 string.
²
Click “
Save
” to save these settings.
Note: For more details about commands, please refer to the display’s user manual.
