13
TL-CAV-01-HDV User Manual
www.tlnetworx.com
and system concurrently.
u
Asynchronous control:
Press
“ON” to
turn on display or long-press it to start system.
Press
“OFF”
to turn off display or long-press it to put system into standby.
²
Press
“HDMI”
or
“VGA”
to switch to the appropriate input source.
l
Via Transmitter
²
Press
“SOURCE SELECT”
to select one source; press again to select next
source.
²
Press
“RESET”
to reboot Transmitter.
4.3
USB Signal Return
Receiver has a USB port (
FROM TOUCH SCREEN)
to connect with an interactive
display. When the user makes annotations or control gestures on the interactive display,
the Receiver will transmit the USB signal to the Transmitter which is connected to a PC
via USB. Please refer to the return path of USB signal as shown as below.
Figure 4-1 Return Path Diagram
Note: The distance between Receiver and interactive display should be within 4m.
Otherwise, a special USB control cable should be used.
