Techkon SpectroPlate, Руководство пользователя

Страница: 18 / 35

Replacement of the rechargeable battery
The rechargeable Ni-MH battery has a high life-span. However, after a certain time
- depending how it was used - it will loose its capacity and it will make sense to
replace it.
Only use original TECHKON SpectroPlate replacement batteries. The use of other
batteries is hazardous!
For opening the battery case you will need a Philips screwdriver type 1.
Place the instrument upside down. Put a soft cloth underneath the display to avoid
any scratches.
Unscrew the battery
casing and remove it.
Later when re-assemb-
ling do not tighten the
screw too much other-
wise it might break.
Remove the battery and pull the plug.
When re-assembling the new battery:
The black cable has to point into the direction towards the
charging contacts. The plug has to clip into the socket.
The image on the battery case door shows how the battery
should be positioned.
Manual TECHKON SpectroPlate Chapter 1 - How to use SpectroPlate Page 18