Techkon SpectroPlate, Руководство пользователя

Страница: 12 / 35

The red Escape button is for canceling any procedure and for closing open menu
windows in order to return to the measurement mode.
In the „Start“-version of SpectroPlate certain „soft keys“ will be not selectable and
are shaded in gray. These are the functions which are only available for the „Expert“-
and „All-Vision“-model.
Device settings
The „soft key“ with the tool symbol opens the window for the device settings.
Within this window you can navigate with the
Arrow buttons and select with the
Enter button . The red Escape button brings you back to the measurement mode.
The INFO screen shows the type
of device (Start, Expert, All-Vision),
the software- and hardware version
as well as the serial number.
Performing a calibration is described on the next page.
Displays a
grid array
as shown here:
Sound
will activate an accoustic signal after each
measurement.
The LCD display contrast
can be turned darker or brighter.
Sets the menu
language
of the device.
A reset puts the device to factory settings.
Attention! All stored measurement values and recently made
calibrations will be deleted. Only the factory-set calibration
values are still valid.
All measurement values get
a
time- and date stamp
.
This information will be
visible when the data is
transmitted to the PC soft-
ware SpectroPlate Connect.
Manual TECHKON SpectroPlate Chapter 1 - How to use SpectroPlate Page 12
onl
y Exper
t