____________________________________________________________________________________________________________________________
Tech
Grow
| Innovative Growing Solutions
14
The values have been reset. The main screen appears
after a few seconds.
Secondly, by completing the following steps:
1.
The main screen is displayed:
2.
Put a precision screwdriver (or paper clip) in the
small round hole on the back of the Clima Micro
Plus Temp/Humidity Fan Control and press one
time. The next screen appears:
The values have been reset. The main screen
appears after a few seconds.
5. Fuse replacement
If a short circuit occurs due to fan overload, the fuse will
blow. Even if the Clima Micro Plus Temp/Humidity Fan
Control does not operate at all, in the worst case, this
could indicate a blown fuse. To replace the fuse you
have to open the Clima Micro Plus Temp/Humidity Fan
Control. Complete the following steps:
1.
Remove the plug from the socket.
2.
Open the housing by unscrewing the 4 screws on
the back of the Clima Micro Plus Temp/Humidity
Fan Control.
3.
Locate the fuse and remove it.
4.
Insert a new 5 amp fuse.
5.
Screw the 4 screws to close the housing.
Your Clima Micro Plus Temp/Humidity Fan Control is
ready for use again.
Temp 26c
Set 25c
Min/Max
Reset