Page 8
4.5 Mounting and removal the module
First drill the fastening and cable holes, then insert the flat keypad cable into the reader
connector 1 carefully (when it is a keypad version), insert the enclosed square screw nut 2
and fasten the module on the wall, see
Pic. 4 a)
.
It is recommended to place an installation box for connection of incoming cables on the other
side of the wall or in highly secured area (with in/out readers).
Pic. 4 a): Fastening the module on the wall
Shut the cover and lock it using enclosed screw, see
Pic. 4 b)
.
Pic. 4 b): Swinging on and locking the cover
Removal of the module can be performed in reverse order.