Page 16
It is not possible to use time schedules when inserting cards in programming mode,
therefore cards are always valid. Any user inserted using a programming card has a default
PIN set to
12345
.
If the reader module’s keypad is set as a code keypad, the programming mode can be
entered by entering the right code at the keypad. It is also possible to insert cards using a
keypad on modules with a code keypad.
6.8.1
Inserting cards (codes) into the reader’s memory
Follow these steps for inserting cards into the rea
der module’s memory:
Step 1
Step 2
Step 3
Read the programming card
(or enter the programming
code) for
inserting
: the reader
goes
into
programming
mode
.
One by one, read the cards
(enter user codes) which are
to be granted access.
About 15 seconds after
inserting the last card (code)
the reader module goes
back into
standard operating
mode
.
Pic.5 a): Inserting cards (codes)
6.8.2
Deleting cards (codes) from the reader’s memory
For deleting the cards from the reader module’s memory use following steps:
Step 1
Step 2
Step 3
Read the programming card
(or enter the programming
code) for
deleting
: the reader
goes
into
programming
mode
.
One by one, read the cards
(enter user codes) which are
to have their access revoked.
About 15 seconds after
deleting the last card (code)
the reader module goes
back into
standard operating
mode
.
Pic.5 b): Deleting cards (codes)