13
2.
Touch the “Time Reset” icon to set timer to zero
3.
Press and hold down the foot switch, the spray time will be accumulated
4.
Release the foot switch when the desired amount of fluid has sprayed
5.
Touch the “Timed” icon to transfer the accumulated spray time to “Timed”
mode
6.
The unit is now set to repeat this “Timed” cycle
5.3
Stored Program in Memory Cell
The unit has 50 memory cells to store all parameters. The controller can activate
all memory cells in sequence mode.
5.3.1
To store dispense parameters
1.
Touch the forward or backward arrow to select the desired memory cell.
2.
Enter all the desired parameters then touch the “Save”
icon to save the data
5.3.2
To run in Continuous Mode
The controller can be setup to repeat the run continuously.
1.
Touch the Setup icon to enter the setup screen
