18
2.
Touch the change “Password” icon
3.
Enter the old password, then enter the new password
4.
Touch the Check Mark icon to save
5.
Touch the X icon to exit
15
2.
Enter number of memory to be run in sequence (ex. 1 to 3)
3.
Touch the “Sequence Mode” icon
4.
Touch the Check Mark icon to save
5.
Touch the X icon to exit
The screen will look similarly to the screen below:
Notes:
A.
If there is no delay time entered in the setting, the operator has
to press the foot switch or touch the Run icon after each
memory cell is completed to activate the next memory cell.
B.
If delay time is entered in the setting, the controller will activate
the next memory cell in sequence automatically.