24
7.6 CLEAR THE ASCEnT/DESCEnT (AS/DS)
CALCuLATOR
Access the Altimeter Display
(See section 7.1 for
how to access the Altimeter display)
• Hold
M
for 3 seconds to enter Altimeter set menu
• Press
LAP/RST(DOwn)
to scroll to
AS/DS
* Press
LAP/RST(DOwn)
to scroll to Clear
* Press
M
to select
Clear
* Press
ST/STP
to clear the ascent/descent
calculator and exit
Clear
• Press
ESC
to exit
AS/DS
• Press
ESC
to exit Altimeter set menu
7.7 SET An ALTITuDE ALARM
Access the Altimeter Display
(See section 7.1 for
how to access the Altimeter display)
• Hold
M
for 3 seconds to enter Altimeter set menu
• Press
LAP/RST(DOwn)
to scroll to
Alt. Alm
.
• Press
M
to select
Alt. Alm
.
* Press
ST/STP
to toggle between the two
altitude alarms
* Press
LAP/RST
to toggle altitude alarm on
and off
• Hold
M
for 3 seconds to enter an alarm altitude
* Press
ST/STP(+)
or
LAP/RST( - )
to
adjust the alarm altitude
* Press
M
to confirm
* Press
ST/STP
to toggle between
Alt. Dif
and
Cur. Alt.
* Alt. Dif. will sound the alarm when
the altitude difference calculator
exceeds or drops below the alarm
value
*
Cur. Alt
. will sound when the current
altitude exceeds or drops below the
alarm value
* Press
ESC
to confirm
Press
ESC
to cancel and exit
Alt Alm
Press
ESC
to exit Altimeter set menu
Note: The altitude alarm will not sound
if you exit the altimeter mode.
7.8 VIEw THE ALTIMETER LOG BOOK
The Traileader’s altimeter contains a logbook
that tracks maximum and minimum
altitude readings over the past 48 hours,
as well as, an hourly time stamped
altitude reading for the last 48 hours.
