Tech Novitas Vega KS Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 39

Tech Novitas Vega KS Series Скачать руководство пользователя страница 32

VEGA KS ( 1/2/3) KVA MANUAL

31

Bypass

Mode

The bypass yellow LED is on.
Bypass tolerance can be set by Bypass

voltage limit setting.

Under below conditions, the UPS will transfer

to bypass mode:

●BPS on set by user through Mode setting
, and set to ECO Mode.
●Press the OFF buttonwhen on Line Mode .
●Overload on Line Mode.

NOTE

：When in bypass mode , the load is not

protected.

ECO Mode

The bypass yellow LED is on.
When ECO enabled and the utility is in range,

the UPS will work on ECO Mode. If the utility in
out of ECO range but still in Line range, the UPS
will transfer to Line Mode.

Utility tolerance ofECO Mode can be set.

Fault Mode

When the UPS has fault. The warning red LED

is on and the buzzer beeps.

The UPS will turn to fault mode. If you turn

on the UPS without the Fan and the LCD display
fault codes. At the moment, you can press the
OFF key to shut down the UPS when the mains
power down. Confirm that there is no serious
fault to turn on the UPS.

NOTE:

As for corresponding information of

the fault code, please refer to alarm or fault
reference code.

3-5

Operational Status and Mode(s)

item

Content Displayed

1

Initialized

2

Standby Mode

«
...
30
31
32
33
34
...
»

Содержание Vega KS Series








































Отзывы:

Нет отзывов