VEGA KS ( 1/2/3) KVA MANUAL
18
LCD control panel introduction
（1）LED（fromtop to bottom: “alarm”, “bypass”, “battery”, “inverter”);
（2）On-Line UPS LCD display;（3）Buttons-FUNC button/OFFbutton/On button.
Indicator
Status
Description
Red
On
The UPS has an active alarm or fault.
Yellow
On
The UPS is in Bypass mode.
The UPS is operating normally onbypassduring
High Efficiency operation.
Yellow
On
The UPS is on Battery mode.
Green
On
The UPS is operating normally on Oline.
NOTE
When power on or startup , these indicators will turn on and off sequentially.
NOTE
On different operation modes , these indicators will indicate differently.
2-7
Setup the UPS
Step 1: UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using
extension cords.
l
For 200/208/220/230/240VAC models: The power cord is supplied in the UPS
package.
Step 2: UPS output connection
l
For socket-type outputs, simply connect devices to the outlets.
l
For terminal-type input or outputs, please follow below steps for the wiring